BWNMP - E-400 MOLDABLE/POURABLE (CATALYST)

Product Identification

Product ID:E-400 MOLDABLE/POURABLE (CATALYST)
MSDS Date:10/24/1986
FSC:8030
NIIN:01-067-7587
Kit Part:Y
MSDS Number: BWNMP

Responsible Party
FLAMEMASTER CORP THE CHEM SEAL DIV
11120 SHERMAN WAY
SUN VALLEY, CA 91352-4949
US

Emergency Phone: 818-982-1650

Info Phone: 818-982-1650 FAX 818-765-5603

Preparer: SAMUEL L. ENGEL,SR.

Cage: 14439

Contractor
FLAMEMASTER CORP THE CHEM SEAL DIV
SUN VALLEY, CA 91352-4949 US

Telephone: 818-982-1650

Cage: 14439

Ingredients

POLYETHYLENE POLYAMIDE FATTY ACID ADDUCT (TRADE SECRET)

Fraction By Weight: 0-27%


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 4-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9394


POLYAMIDE RESIN

CAS: 68410-23-1

Fraction By Weight: 0-32%


FILLERS,NONHAZARDOUS

Fraction By Weight: 20-21%

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:MAY CAUSE IRRITATION OR
BURNS.SKIN:MAY CAUSE IRRITATION,BURN AND ALLERGIC
SENSITIZATION.INGEST/INHAL:NOT REPORTED.
Explanation of Carcinogenicity:THERE ARE NO INGREDIENTS ABOVE 0.1%
WHICH ARE IDENTIFIED AS CARCINOGENS BY NTP,IARC OR OSHA.
Effects of Overexposure:SKIN:CHEMICAL BURNS OR ALLERGIC SKIN
RASHES,POSSIBLY SEVERE.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
AILMENTS MAY BE AT INCREASED RISK FROM EXPOSURE.

First Aid

First Aid:SKIN:REMOVE CONTAMINATED CLOTHING;WASH WITH MILD SOPA AND
WATER.EYES:FLUSH WITH WATER FOR 15 MINUTES.INHAL:REMOVE TO FRESH
AIR.GIVE OXYGEN OR ARTIFICIAL RESPIRATION IF NEEDED.INGEST:DO NOT
INDUCE VOMI TING.GET PROMPT QUALIFIED MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:TCC
Flash Point:=78.3C, 173.F
Lower Limits:1.4
Extinguishing Media:WATER,DRY CHEMICAL,CARBON DIOXIDE,FOAM.
Fire Fighting Procedures:USE A SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:FIRE CONDITIONS MAY EVOLVE TOXIC FUMES.

Accidental Release

Spill Release Procedures:SOAK UP WITH NON-COMBUSTIBLE INERT
ADSORBANT(EG.CLAY);PLACE COLLECTED MATERIAL IN AN APPROPRIATE
CONTAINER FOR DISPOSAL;CLEAN SPILL AREA TO REMOVE SLIPPERINESS.
Neutralizing Agent:NOT APPLICABLE.

Handling

Handling and Storage Precautions:STORE IN A COOL,DRY,WELL-VENTILATED
PLACE.KEEP CONTAINER CLOSED WHEN NOT IN USE.KEEP AWAY FROM
HEAT,SPARKS,FLAMES AND INCOMPATIBLE MATERIALS.
Other Precautions:FOLLOW LABEL DIRECTIONS.AVOID BREATHING VAPORS.AVOID
SKIN AND EYE CONTACT.

Exposure Controls

Respiratory Protection:WHERE ENVIRONMENTAL CONTROLS ARE LACKING OR IN
ENCLOSED SPACES USE A NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
VAPORS.
Ventilation:LOCAL VENTILATION AT THE WORKSITE;MECHANICAL(GENERAL)
VENTILATION TO MAINTAIN TLV/PEL.
Protective Gloves:NEOPRENE
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:USE A BARRIER CREAM.PROVIDE A LOCAL EYE WASH
STATION.
Work Hygienic Practices:USE REASONABLE CARE IN HANDLING THIS
PRODUCT.WASH HANDS AFTER USE AND BEFORE EATING.
Supplemental Safety and Health
KEY1;V4.HMIS SPOKE TO DEBORAH,AT FLAMEMASTER CORP.WE LEARNED FROM HER
THAT COMPONENTS FOR BOTH THE BASE AND CATALYST ARE LISTED ON THE
SAME MSDS.THE FIRST 3 ITEMS ARE FROM THE BASE;THE REST ARE FROM T
HE CATALYST.

Chemical Properties

HCC:V4
Boiling Pt:=93.3C, 200.F
Vapor Pres:1
Vapor Density:1
Spec Gravity:0.7
pH:11
Viscosity:4-540 P
Evaporation Rate & Reference:1 (N-BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:VISCOUS LIQUID;WHITE OR OFF-WHITE;SWEET AROMATIC
ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND ACIDS.
Stability Condition to Avoid:HIGH HEAT,SOURCES OF IGNITION.
Hazardous Decomposition Products:CARBON DIOXIDE,CARBON
MONOXIDE,ALDEHYDE AND NITROGEN.
Conditions to Avoid Polymerization:MIXING PARTS A & B TOGETHER WILL
RESULT IN POLYMERIZATION.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.